Pipe Production LinePVC four-pipe production line
Introduction
1.high capacity
2.suitable pipe diameter :16-32mm
3.speed 1-10m/min
PVC four-cavity pipe production line
Character and performance
4 cavity pvc electrical tube ,water supple pipe extrusion line can extruder four pipes at the same time on one machine .this line can save investment cost in factory buliding and production ,which increase the capacity a lot and reduce production time .SJSZ65 conical twin-screw extruder can easily reach 5.5-6.5 tons per day ,the production speed take 16mm as example can get more than 8-10m/min.
the whole line is composed of conical twin screw extruder 65mm, 4 cavity mould ,4 cavity cooling calibration tank ,4 station haul-off,4 station cutter and 4 station tipping table.
Main parameter :
1. suitable diameter :16-32mm
2.four haul-off :up-down two caterpillar tracking
3.drawing speed :1-10m/min
4.drawing forth:6000N
The main Technical Parameter of this production line
Models
| Model | extruder | pipe scope | MaX. output | Max. speed | total power | line length |
| GF-50×2 | SJSZ-51/105 | (16-50)×2 mm | 150 kg/h | 12 m/min | 40 kw | 20 m |
| GF-63 | SJSZ-45/90 | 16-63 mm | 100 kg/h | 12 m/min | 30 kw | 20 m |
| GF-110 | SJSZ-55/113 | 50-110 mm | 180 kg/h | 8 m/min | 40 kw | 24 m |
| GF-160 | SJSZ-65/132 | 75-160 mm | 300 kg/h | 5 m/min | 50 kw | 24 m |
| GF-250 | SJSZ-80/156 | 110-250 mm | 400 kg/h | 4 m/min | 75 kw | 30 m |
| GF-315 | SJSZ-80/156 | 160-315 mm | 400 kg/h | 3.5m/min | 130 kw | 35 m |
| GF-450 | SJSZ-92/188 | 250-450 mm | 600 kg/h | 2 m/min | 200 kw | 36 m |
| GF-630 | SJSZ-92/188 | 315-630 mm | 600 kg/h | 2 m/min | 230 kw | 38 m |
Leave a Message
Your email address will not be published. Required fields are marked