Numerical-control Folder & Slitter Machine

Numerical-control Folder & Slitter Machine

a. Parameter of machine part：

• 1) Type：WHZW6000
• 2) Working length：6000mm
• 3) Press head：6
• 4) Weight：4800kg
• 5) Pressing power：130kn
• 6) Bending range：0-1250
• 7) Depth of throat：800mm（Max. working width of material in clamp）
• 8) Folder low worktable：back and forth 27mm, with quad of 12.7mm can be knock down
• 9) Width of up and low worktable：28mm
• 10) Hinge：parallel four connected pole
• 11) Act component of worktable：hydraulic double oil cylinder
• 12) Circle time：Max. bending limit take about 12 seconds
• 13) Motor power of hydraulic station：11kw
• 14) Total power：11.5kw
• 15) Outline dimension（length×width×height）：7395×1842×1375mm

b. Parameter of slitting system：

• 1) Type：rotary blade
• 2) Diameter：Ø100mm 
• 3) Material：W18Cr4V
• 4) Drive system：hydraulic motor and chain for transmission
• 5) Guiding device：fix linear rolling rail on low worktable of folder
• 6) Slitting speed：about 0.8m/second
• 7) Slitting distance: about 50mm of upper blade stand

c. Parameter of folding and slitting capability：

• 1) Max. bending thickness      1.2mm steel panel(yield intensity≤250Mpa)
• 2.0mm soft aluminum panel
• 0.8mm stainless steel
• 2) Max. bending length         6000mm
• 3) Max. slit thickness           1.2mm steel panel(yield intensity≤250Mpa)
• 2.0mm soft aluminum panel
• 0.8mm stainless steel
• 4) Min. folding dimension       10mm（panel thickness＜1.2mm)
• 20mm（panel thickness≥1.2mm）

d. Parameter of hydraulic power system:

• 1）Type：pressure compensate and load pressure induce system
• 2）Capability：11kw、150bar、40L/min
• 3）Capacity of oil tank：180L

e. Parameter of computer controlling system

• 1) System：industry PC and rotary encoder for controlling bending angle
• 2) Numerical control locating system：servo system to control bending length automatically
• 3) Operating table：operating display fixed on the swing arm, which has automatic and manual function
• 4) Angle programme：0-1250 with 10 as accuracy，input on the screen
• 5) Control of upper worktable：inching control by handspike and pedal on the controlling box
• 6) Control of low worktable：use operating pole when manual control, use button when automatic control
• 7) Slitting control：button for controlling ahead，stop and back
• 8) Emergency stop：long pedal for control